A multidecadal oscillation in precipitation and temperature series is pronounced in low flow series from Puget Sound streams

In Pacific Northwest streams, summer low flows limit water available to competing instream (salmon) and out-of-stream (human) uses, creating broad interest in how and why low flows are trending. Analyses that assumed linear (monotonic) change over the last ~60 years revealed declining low flow trends in minimally disturbed streams. Here, polynomials were used to model flow trends between 1929 and 2015. A multidecadal oscillation was observed in flows, which increased initially from the 1930s until the 1950s, declined until the 1990s, and then increased again. A similar oscillation was detected in precipitation series, and opposing oscillations in surface temperature, Pacific Decadal Oscillation, and Interdecadal Pacific Oscillation series. Multidecadal oscillations with similar periods to those described here are well known in climate indices. Fitted model terms were consistent with flow trends being influenced by at least two drivers, one oscillating and the other monotonic. Anthropogenic warming is a candidate driver for the monotonic decline, and variation in (internal) climatic circulation for the oscillating trend, but others were not ruled out. The recent upturn in streamflows suggests that anthropogenic warming has not been the dominant factor driving streamflow trends, at least until 2015. Climate projections based on simulations that omit drivers of multidecadal variation are likely to underestimate the range, and rate of change, of future climatic variation.     

Animal agency in wildlife conservation and management

Wildlife conservation and management (WCM) practices have been historically drawn from a wide variety of academic fields, yet practitioners have been slow to engage with emerging conversations about animals as complex beings, whose individuality and sociality influence their relationships with humans. We propose an explicit acknowledgement of wild, nonhuman animals as active participants in WCM. We examined 190 studies of WCM interventions and outcomes to highlight 3 common assumptions that underpin many present approaches to WCM: animal behaviors are rigid and homogeneous; wildlife exhibit idealized wild behavior and prefer pristine habitats; and human–wildlife relationships are of marginal or secondary importance relative to nonhuman interactions. We found that these management interventions insufficiently considered animal learning, decision-making, individuality, sociality, and relationships with humans and led to unanticipated detrimental outcomes. To address these shortcomings, we synthesized theoretical advances in animal behavioral sciences, animal geographies, and animal legal theory that may help conservation professionals reconceptualize animals and their relationships with humans. Based on advances in these fields, we constructed the concept of animal agency, which we define as the ability of animals to actively influence conservation and management outcomes through their adaptive, context-specific, and complex behaviors that are predicated on their sentience, individuality, lived experiences, cognition, sociality, and cultures in ways that shape and reshape shared human–wildlife cultures, spaces, and histories. Conservation practices, such as compassionate conservation, convivial conservation, and ecological justice, incorporate facets of animal agency. Animal agency can be incorporated in conservation problem-solving by assessing the ways in which agency contributes to species’ survival and by encouraging more adaptive and collaborative decision-making among human and nonhuman stakeholders.     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.     

Physico-chemical characterization of Residual Household Waste for energy recovery in insular territories: Case study of Reunion Island

Waste-to-energy is a promising approach to face the current challenge of waste overproduction in Reunion Island, a French territory. In this particular context of an isolated and tropical territory, it is essential to study the properties of potential feedstocks to choose the most appropriate conversion process. This article reports on the composition of Residual Household Waste from Reunion Island and its physico-chemical parameters. Twelve representative samples of Residual Household Waste were subjected to thermal and elemental analysis. The results showed that their composition had a significant influence on the physico-chemical properties, including calorific value. Residual Household Waste from the selective sorting (rich in wood, plastic, and sanitary textiles) as well as dry mixed RHW are the most interesting for energy recovery. Due to their high volatile matter and high carbon content, and their low moisture content, these types of waste have a high calorific value exceeding 18 MJ/kg. Furthermore, the RHW sample comply with the environmental and health criteria applied by French regulations concerning halogen and heavy metal. Thus, it seems that Residual Household Waste can be an alternative to conventional fuels used in incineration or pyro-gasification processes. However, the study also points the need for a pre-treatment process for these wastes. Indeed, it is necessary to sort them correctly in order to avoid the risks of pollution and important maintenance. And more importantly, drying beforehand is unavoidable to improve combustibility and obtain optimal energy conversion.     

沼泽湿地水生无脊椎动物完整性指数构建与健康评价

依据2017年5、7、9月对三江平原19处沼泽湿地(参照湿地6处,受损湿地13处)的水生无脊椎动物采样结果,应用生物完整性理论和方法,构建水生无脊椎动物完整性指数,评价三江平原沼泽湿地健康状况。通过对27个候选指标的分布范围、判别能力和相关性分析,筛选出总分类单元数、扁卷螺科百分比、龙虱科百分比、刮食者百分比4个指标构成水生无脊椎动物完整性指数核心指标。采用比值法计算各指标参数值,将各参数值加和得到水生无脊椎动物完整性指数值。根据参照湿地水生无脊椎动物完整性指数值的25%分位数值确定评价标准,对小于25%分位数的值进行三等分,确定三江平原沼泽湿地健康评价标准:≥2.58,无干扰;1.72～2.58,轻度干扰;0.86～1.72,中度干扰;0～0.86,重度干扰。结果表明:所调查的三江平原沼泽湿地有78.95%受到不同程度的干扰(其中47.37%受到了中重度干扰),21.05%属于无干扰。     

Effects of EGR on performance and emissions of a diesel engine fuelled with balanites aegyptiaca/diesel blends

In this study, balanites Aegyptiaca (L.) Del biodiesel was blended in proportions of 10% and 20% on the volume basis with diesel fuel and tested in a single cylinder, VCR diesel engine under measured load conditions with varied EGR rates (0, 10 and 20%). The results showed that B10 and B20 blends shown a significant reduction rate in terms of NO_x emissions that were familiar with biodiesel blends. At peak load conditions, BTE increased slightly for test fuel blends compared with pure diesel fuel while the BSFC rate and EGT suffered from increasing and decreasing nature with respect to blending percentage. From the emissions point of view, with the increase in blends percentage, a significant reduction rate is observed in terms of CO and HC concentrations (up to 12.34 and 17.5%, respectively) while NOx emissions decreased at peak load conditions (up to 24.34%). HC and CO emissions decreased with increase in blends percentage. However, lower levels of NO_x and EGT (up to 21.37 and 8.47%, respectively) and the average increase in terms of BTE and BSFC (up to 2.83 and 2.9%, respectively) can be realised with B20 test fuel blend under 20% EGR rate.     

新制备生物炭的特性表征及其对石油烃污染土壤的吸附效果

生物炭作为一种绿色环保的功能材料因其在污水处理和污染土壤修复方面具有显著效果而受到极大关注.采用红外光谱、元素分析仪及微孔分析对不同温度(200、300、400、500和600℃)条件下制备的木屑和麦秆生物炭进行特性表征,并采用制备的生物炭净化石油污染土壤,分别考察了污染物性质、生物质原料和热解温度对其净化效果的影响.结果表明,随着热解温度的增高,生物炭芳香化程度增加,极性降低,微孔结构逐渐发育,表面积增大.加入生物炭33 d后,污染土壤中总石油烃及其组分烷烃的浓度比对照略有降低,而PAHs浓度下降显著.随着热解温度升高,2种生物炭对PAHs的吸附强度均逐渐增大,芳香度增高、表面积增大是强吸附的主要原因.2种生物炭在400℃及以下温度制备时对PAHs的吸附强度为:木屑生物炭＞麦秆生物炭;而400℃以上温度制备的生物炭吸附强度则相反,即麦秆生物炭＞木屑生物炭,说明生物炭原料对其吸附强度也具有显著影响.     

淮河支流污染物综合降解系数动态测算

确定河流污染物综合降解系数动态变化规律对提高水环境容量测算精度和水环境管理具有重要意义。通过现场模拟法,采用一维稳态模型测算了淮河支流洪河五沟营-塔桥乡河段COD、氨氮和总磷在枯水期、平水期和丰水期的综合降解系数,COD、氨氮和总磷降解系数在各水期的关系为枯水期平水期丰水期,提出了建议值并利用实测浓度对计算结果进行了检验,结果表明,不同水期综合降解系数吻合情况较好。     

空气质量AQI实时发布的改进探讨

针对《环境空气质量指数(AQI)技术规定(试行)》(HJ 633-2012)中对空气质量AQI实时发布存在的欠缺,从增加颗粒物1 h浓度的AQI分级浓度限值及颗粒物24 h滑动平均值计算方法改进着手,解决PM2.5和PM10的24 h滑动平均值实时延迟、1 h平均值代替24 h滑动平均值偏高等问题。     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期，在分析环空中测试波的传播特征及基音周期检测的基础上，提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法；利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验；对检测信号进行中心削波处理并计算ACF/AMDF，提取出液面回波周期并与理论计算值对比分析；同时分析了现场环空液位检测信号，提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期；室内实验中，该方法最大误差绝对值为1.54%；该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等，处理后的信号曲线在回波周期处峰值更加突出、集中，而在其他位置更加平滑，提高了对液面回波周期特征的辨识能力。